BIRMINGHAM FASTENER
Booth #1849 · ACE AWWA 2026
Birmingham Fastener manufactures Cor-Blue T-head bolts from U.S. weathering steel, coated with FluoroKote#1® fluoropolymer end-to-end, in-house. Material test reports on every shipment. Come see the difference at Booth #1849.
Schedule a Booth MeetingTakes less than 60 seconds. A rep will confirm before the show.
Blue-coated T-head bolts are a waterworks staple. But coating consistency, material origin, and traceability vary widely across suppliers. Cor-Blue is manufactured and coated in the U.S., hand-inspected for cure and adhesion coverage, and backed by documentation that tells you exactly what you are installing and where it came from.
If you cannot get a straight answer to all three, that is the conversation we are ready to have at Booth #1849.
Cor-Blue is manufactured and coated in the U.S., start to finish. You can trace every bolt back to its material source. If your supplier cannot tell you where the steel came from and where the coating was applied, you cannot verify what you are putting in the ground.
We include material test reports on every shipment — not as an add-on, not on request. If your current supplier only provides documentation when you ask for it, that tells you something about how they think about traceability.
T-head bolts, MJ gasket packs, flange accessory kits, ASTM A307 Grade B bolts — Birmingham Fastener supplies the complete waterworks fastener line. One supplier, one point of accountability, one set of documentation standards across everything you order.
We will have product samples, MTRs, and technical staff on the floor. Fill out the form and a Birmingham Fastener rep will reach out before the show to confirm your meeting time.
Questions before the show?